Product information

Electroplated Acetic Acid Salt Spray Test Equipment

If you are interested in this product, you can
product name: Electroplated Acetic Acid Salt Spray Test Equipment
product number: LY-60-160
Exhibitors: other brand
Product Documentation: No Related Documents

a brief introdction

Electroplated Acetic Acid Salt Spray Test Equipment For Stainless Steel can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect. Controller of Electroplated Acetic Acid Salt Spray Test Equipment are in the same panel, the operation simple and clear.


Electroplated Acetic Acid Salt Spray Test Equipment  Detailed description

800L Electroplated Acetic Acid Salt Spray Test Equipment For Stainless Steel



Introduction:

 

Electroplated Acetic Acid Salt Spray Test Equipment For Stainless Steel can determine the corrosion resistance of iron metal or the iron metal inorganic film or organic film test, such as: electroplating, anode processing, conversion coating, painting, ect.



Characteristics:


1  PID controller.
2  Entire PVC sheet material, the internal ring with the use of advanced three-dimensional flutter high technology products, strong structure, fresh, never deformation and acid 
and alkali, high temperature and never aging, for salt spray, copper acetate, 
and other test specifications.
3  Controller of Electroplated Acetic Acid Salt Spray Test Equipment are in the same panel, the operation simple and clear.
4 Neutral salt spray (NSS), acetic acid salt spray ( AASS ), copper accelerated salt spray ( CASS ) 
   either of the test laboratory
5  The cover is made of transparent materials so that the operator can see the tested sample in the chamber and the spraying situation of the tested sample.
6  A waterproof structure is adopted between the chamber cover and chamber body and thus there is no salt spray overflow.
7   Adopts the tower spraying system and equipped with the salt solution filter system and non-crystal nozzle so as to realize even salt spray distribution and freely adjustable settlement.


Design standards: 

 

ISO9227,CNS3627,3885,4159,7669,8886,JIS D-0201,H-8502,H-8610,K-5400,Z-2371,ISO 3768,3769,3770,ASTM B-117,B-268,GB-T2423,GJB 150.

 

The Main Technical Parameter: 

 

Model:                                       LY-609-160  

Inner Box Size (L×W×H) 

160×100×60 cm
Outside Box Size(L×W×H) : 230×130×140 cm
Temperature Range : 35°C~55 °C
Temperature Fluctuations : ≤±0.5°C
Temperature Uniformity : ±1°C
Brine Temperature : 35°C±1°C
Spray Quantity : 1.0~2.0 ml / 80cm2 / hr
Lab Volume : 800L
Brine Tank Capacity : 40L
Power : AC220V,10A
Accessories : Testing Salt/ Measuring tank/ Equipment  each 1 set
Equipment Material Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent  P.V.C. rigid plastic board
Test Chamber Temperature Salt Spray Method (NSS ACSS)35±1°C 
Corrosion-resistant Testing Method(CASS)50±1°C
Saturated air Barrel Temperature Salt Spray Method (NSS ACSS)47±1°C 
Corrosion-resistant Testing Method(CASS)63±1°C
PH Salt Spray Method (NSS ACSS6.5~7.2)Corrosion-resistant Testing Method(CASS)3.0~3.2
Multiple Safety Protection Devices : Current discharge protection, over pressure protection,over temperature protection, over load fuse protection 

 

800L Electroplated Acetic Acid Salt Spray Test Equipment For Stainless Steel

800L Electroplated Acetic Acid Salt Spray Test Equipment For Stainless Steel

Leave a message for product
Title
Contact
Tel
Content
Verify Code
Click to change
Note:1. Shortcut key for send message :Alt+s or Ctrl+Enter!
2. If necessary, please leave your detail contact!